With multi-lead threads, tapered bodies and soft and dense bone surgical protocols, the Tapered Screw-Vent Implant System is designed to achieve high primary stability.

	Tapered Implant Body	When the tapered implant is inserted into a straight, undersized osteotomy, bone is compressed resulting in enhanced primary stability. The tapered body also facilitates implant placement between convergent roots, in areas with labial concavities and in immediate extraction sites.
	Triple-lead Threads	Three independent, external threads start 120 degrees apart and spiral around the implant body at a steeper angle than conventional implant threads. Each 360-degree turn seats the implant 1.8mm instead of the 0.6mm of standard threads. This allows for full seating of an implant in a third of the time.

High primary stability enables immediate restorations and single-tooth immediate loading of Tapered Screw-Vent^1-3 and Zimmer One-Piece Implants where indicated and clinically appropriate
Soft Bone surgical protocol compresses bone to provide additional stability in poor quality sites³
In dense bone, the stepped finishing drill allows apical engagement for initial stability³

References

1. Siddiqui AA, O’Neal R, Nummikoski P, Pituch D, Ochs M, Huber H, Chung W. Immediate loading of single-tooth restorations: 1-year report from a 3-year prospective clinical study. J Oral Implantol. 2008. Accepted for publication.

2. Shiigai T. Pilot Study in the Identification of Stability Values for Determining Immediate and Early Loading of Implants. J Oral Implantol. 2007;33:13-22.

3. Rosenlicht JL. Advancements in Soft Bone Implant Stability. West Indian Dent J. 2002;6:2-

Please note that not all products are available in every country/region.

Please check with a Zimmer Dental representative for availability and additional information.